DMT143

Miniature Dewpoint Transmitter for OEM Applications

Features/Benefits

• Miniature size dew point transmitter for e.g. small industrial dryer applications
• Vaisala DRYCAP® technology with auto-calibration
• Calibration interval of two years
• Dew point measurement range -60...+60 °C (-76...+140 °F)
• Accuracy ±2 ºC (±3.6 ºF)
• Withstands condensation
• Fast response time
• Compatible with Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70
• NIST traceable calibration (certificate included)
• Easy servicing and data transfer via the RS485 user interface
• LED alarm for exceeded dew point level

Vaisala DRYCAP®

The Vaisala DRYCAP® Dewpoint Transmitter DMT143 is a miniature dew point measurement instrument. The transmitter can be installed directly into pressurized systems at 50 bar (725 psia) maximum pressure. The long-term high performance is achieved with Vaisala DRYCAP® technology.

The sensor fully withstands getting wet, and therefore, the transmitter performs exceptionally well in applications that occasionally experience process water spikes, such as pipeline condensation during a system failure or start-up. The sensor is also highly resistant to particulate contamination, oil vapor and most chemicals, and is insensitive to the flow rate.

Long Calibration Interval

The calibration interval of the DMT143 is two years. Additionally, the Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70 can be used to confirm the performance of the DMT143 without disconnecting the transmitter. For any adjustment needs, the transmitter can be sent to Vaisala Service.

The auto-calibration software works on-line while the process is running. If the measurement accuracy is not confirmed, corrections are made automatically.

Easy Installation

The DMT143 has a variety of features to choose from, including different output, installation options and alarm LED. Due to its small size and light weight, the DMT143 is quickly and easily installed in tight spaces or in small-size pipelines. The alarm LED indicates too high dew point in the process. The trigger point is preset at the factory. It can be later adjusted with the Vaisala DRYCAP® Hand-Held Dewpoint Meter DM70 or a PC.